If you have a nice Heritage house and would like an economic gate to match then consider colonial pickets, other wise any type of timber pickets can also be used.

Timber Picket gates have an aluminium frame that may be powder coated to match a colorbond colour or any other powder coating colour including special finishes.

 

Frames can be made from:

• 38mm x 25mm x 1.5mm round corners small swing gates only.
• 40mm x 25mm x 2.5mm square corners small gates only (bottom rail of a sliding gates 40mm x 80mm x 3mm)
• 40mm x 40mm x 3mm (bottom rail of a sliding gates 40mm x 80mm x 3mm)
• 50mm x 50mm x 3mm (bottom rail of a sliding gates 50mm x 100mm x 3mm)