INSTALLING AUTOMATIC GATE OPERATORS AND RELATED PRODUCTS
All of Grants Automation Gate Operator Systems and related products are either 12 or 24V so you don't need to be a licenced electrician to install them. No special equipment is needed, there is no welding required, a basic set of Handymans Tools and the ability to use them is all that is needed. All mounting brackets required are included, all that is needed is suitable fixing hardware, which depends on the size and materials the gates and posts are made from.
Full installation manuals can be download from our web site before you buy. All manuals for operating systems and most related products have been clearly written and illustrated by us with the first time installer in mind to make everything as simple as possible. If you run into any trouble with anything then help is only an email or phone call away.
INSTALLING GATES AND POSTS
The key factor in installing a gate is to firstly make sure you have suitable gate posts. See our Posts for Automatic Gates page for information on this. The second factor is to make sure the gate fits into the space you have. If you have a gate and are yet to install posts or you have posts in and are yet to measure up for a gate to be made then see our Measuring up for Swing gates or Measuring up for Sliding Gates pages
If you haven't decided whether you want a swing or sliding gate yet then see our page on Swing or Sliding gates.